Black Granite Stone Cube Price

Black Granite Stone Cube Price

Size:
100x100x30mm loose cubes or 320x320x30mm on mesh pavers
Surface finish: flamed top side, edges sawn or edge tumbled
If you are interested in our black granite stone cubes on mesh, please kindly inquire us now. We would do our best to offer you the best price.
Send Inquiry
Chat Now
Product Introduction

Black granite stone cube On mesh Products photos

 

BLACK GRANITE CUBES 320X320X30MM ON MESH
Style-A Black granite stone cube on mesh
lightning black granite tumbled cubes
Style-B Black granite stone cube on mesh

 

 

Black Granite Stone Cubes & Pavers: 

Pricing for black granite paving products like your specified sizes is highly variable. Here's what influences the cost and a realistic range:

 

Key Price Factors:

Granite Origin & Quality: This is the biggest factor.

Premium (e.g., Absolute Black, Zimbabwe Black): Deep, consistent black color, minimal variation, very high density. Significantly more expensive.

 

Standard Commercial Black (e.g., Chinese Black, Indian Black): More common, may have slight grey/brown flecks, more color variation, generally good quality. Most common for paving.

 

Lower Grade: More variation, potential fissures, less consistent finishing. Less common for reputable suppliers.

 

Finish:

  • Flamed / Thermal: Rough, textured, non-slip surface. Most common for pavers/cubes. Usually standard price.
  • Honed: Smooth, matte finish. Slightly higher cost than flamed.
  • Polished: Glossy finish. Rarely used for paving (slippery), much higher cost.

 

Thickness: Your specs differ:

30x30x3cm Pavers (30mm Thick): Standard thickness for pedestrian pavers. Thicker stone costs more per sqm than thinner.

 

Loose pieces 100x100x30mm Cubes : This is a thinner-than-standard cube. Standard cubes are typically 50mm, 60mm, or 80mm thick (especially for roads/driveways). 30mm is suitable for light pedestrian traffic only. Being thinner might reduce cost slightly per cube vs. thicker ones, but the mesh backing adds cost.

 

Mesh Backing (For Cubes): Size 320x320x30mm ( small pieces 100x100x30mm Cubes on Mesh ):

 

Significant Cost Factor: Pre-mounted cubes on mesh (usually fiberglass or plastic) command a premium (often 25-50% or more) compared to loose cubes of the same size/thickness. This reflects the labor and materials for mounting, plus the convenience factor for installers.

Quantity: Larger orders (e.g., full container loads) get better per-unit pricing.

 

Supplier & Location: Importers, wholesalers, and local stone yards have different markups. Geographic location affects freight costs.

Order Complexity: Custom sizes or finishes cost more.

 

Estimated Price Ranges (USD per Square Meter - SQM):

Important: These are rough wholesale/contractor-level estimates for the stone material only. Retail prices will be higher. Installation, delivery, and taxes are extra.

 

Assume Standard Commercial Black Granite (e.g., Chinese/Indian), Flamed Finish unless noted.

32x32x3cm (300x300x30mm) Pavers (Loose):

 

Loose Pavers: $25 - $35 USD per SQM

(This is a common paver size, keeping costs relatively moderate).

 

320x320x30mm (10x10x3cm Small pieces Cubes on Mesh ):

Cubes on Mesh: $30 - $55+ USD per SQM

(Reason for higher range: Mesh backing premium + smaller size requires more cutting per sqm).

 

Price Range Notes & Caveats:

Premium Granite: If using Absolute Black/Zimbabwe, add 50-150%+ to the above ranges.

Thickness Impact (Cubes): While 30mm is thinner, the mesh premium dominates the cost for the cubes. Standard 50-60mm thick cubes without mesh might fall in the $40-$65/SQM range. Adding mesh pushes them well above that.

Minimum Quantities: Suppliers often have minimum order quantities (e.g., 150 sqm).

 

Mesh Quality: Heavier-duty mesh might cost slightly more.

Samples & Quotes: Essential. Always get physical samples to check color, quality, and finish. Obtain detailed quotes from multiple suppliers specifying:

 

  1. Exact granite type (commercial name or quarry origin)
  2. Exact finish
  3. Precise dimensions & tolerances
  4. Mesh type (if applicable)
  5. Price per SQM (and per pallet/unit if different)
  6. Delivery costs to your site
  7. Lead time

 

Summary:

For budget planning on a standard commercial black granite project:

Budget $25-$35/SQM for the 300x300x30mm pavers (loose).

Budget $30-$55+/SQM for the 100x100x30mm cubes pre-mounted on mesh.

 

Remember these are material costs only. Factor in significant additional costs for delivery, potential import duties, installation labor, base materials (gravel, sand), edge restraints, and sealants. Getting specific quotes based on your project location, exact stone choice, and required quantities is crucial.

 

Hot Tags: black granite stone cube price, China black granite stone cube price supplier, factory, black cobblestone mesh tiles, wholesale black granite cobble mats, volcanic stone cobble mesh sheets, Landscaping Granite Mesh Cobblestone, Commercial Fantail Granite Pavers, Non Slip Fantail Granite Pavers

Send Inquiry

whatsapp

Phone

E-mail

Inquiry