There are various methods for installing marble wall tiles, including dry hanging, wet pasting, and direct pasting.
Dry-hang way:
Dry hanging is a common installation method suitable for various types of factory structures. The specific steps are as follows 2:
The wall is fixed with expansion bolts and leveled by welding angle steel.
Tie the marble to the angle steel with copper wire.
Wet stickers
Wet pasting is suitable for thin stone materials, with a thickness of less than 8mm and a weight similar to wall tiles. It can be pasted with specialized mortar. The specific steps are as follows 2:
We need to first lay a layer of steel mesh on the wall.
Then use concrete wet plaster.
Directly paste
The direct pasting method is simple and fast, but it is not suitable for humid environments such as bathrooms. The specific steps are as follows:
Dot pasting uses stone specific adhesive, with a dot range of no more than 25cm and a dot quantity of no less than 3-4cm. The adhesive thickness should be above 0.5cm, and this method is used for slightly thicker stones.
The surface pasting method is suitable for thin stone materials with a thickness of less than 8mm and a weight similar to wall tiles. It can be pasted with specialized mortar.
The above are some common methods for installing marble wall tiles. It should be noted that when choosing the installation method, factors such as the material of the wall, the thickness and weight of the marble, and the usage environment should be considered.
